A

Abidin, Alwi and Berchmans, Hanny J. and Nasution, Henry (2021) Bearing Condition Monitoring to Avoid Unplanned Breakdown in Critical Equipment. Masters thesis, Swiss German University.

Aisa, Neilinda Novita and Nasution, Henry and Sofyan, Edi (2021) The Effect of Injection Parameter on Acrylonitrile Butadiene Styrene (ABS) Products Using Fuzzy Logic System. Masters thesis, Swiss German University.

Anwari, Ahmad and Sofyan, Edi and Sudarto, Sumarsono (2021) Improving Talent Performances by Using Integrated Learning Development Program in Indonesia Leading Heavy Equipment Distributor. Masters thesis, Swiss German University.

Ardian, Thomas and Sinaga, Erikson F. (2021) Development of Musical Water Fountain in Correspond to Tonal Music Notes. Bachelor thesis, Swiss German University.

Ariyanto, Budy and Sumarsono, Sumarsono and Sofianti, Tanika D. (2021) Improving Work in Process Quality (Bias Cutting Process) by Using Poka-Yoke and Define Measure Analysis Improve Control (DMAIC) Method in Leading Motorcycle Tire Manufacturing. Masters thesis, Swiss German University.

Arwidhiatma, Paulus Gagat Charisma and Berchmans, Hanny J. and Rusli, Leonard P. (2021) Design and Develop an Open-Sources Portable Electric Pump Emergency Resuscitator. Masters thesis, Swiss German University.

Arwidhiatma, Paulus Gagat Charisma and Berchmans, Hanny J. and Rusli, Leonard P. (2021) Design and Develop an Open-Sources Portable Electric Pump Emergency Resuscitator. Masters thesis, Swiss German University.

Aziz, Mochamad Hamdan and Hendriana, Dena (2021) Periodic Maintenance Monitoring System Using IoT for Komatsu Bulldozer. Masters thesis, Swiss German University.

B

Baladi, Baladi and Hendriana, Dena and Sofyan, Edi (2021) Improving of the Mechanic Qualification Standard Related with Customer Satisfaction at Leading Heavy Equipment Distributor Company in Indonesia. Masters thesis, Swiss German University.

Baskoro, Gembong (2021) Reducing Scrap of Cement A3CM-05 by Using PDCA (Plan Do Check Action) and QCC (Quality Control Circle) Method in an Indonesia Leading Tire. Proceedings The 3rd International Conference on Business and Management of Technology. ISSN 9786233180290

Baskoro, Gembong (2021) Strive Reliable Heavy Equipment Main Component Lifetime with Oil Monitoring System in Condition based Maintenance Implementation Through IoT. Proceedings The 3rd International Conference on Business and Management of Technology. ISSN 9768-623-318-029-0

Baskoro, Gembong (2021) Tertiary (Higher) Education in Indonesia under pressure: innovation towards the next normal as a consequence of pandemic Covid 19. Proceeding of The 3rd International Conference on Business and Management of Technology (IConBMT) 2021. ISSN 978-623-318-029-0

Baskoro, Mohammad Yoga and Sudarto, Sumarsono and Baskoro, Gembong (2021) Availability Improvement by Implementing Customize Maintenance Strategy in Rental Operation of Indonesian Forklift Distributor Company. Masters thesis, Swiss German University.

Burhan, Bakhtiar and Hendriana, Dena and Berchmans, Hanny J. (2021) Green Building Analysis of PT United Tractors on Existing Building Based on The Latest Rating Tools Green Building Council Indonesia. Masters thesis, Swiss German University.

C

Cahyono, Bayu and Sumarsono, Sumarsono and Hendriana, Dena (2021) Sustainable TQM Implementation in Relationship with Customer Satisfaction and Business Performance in Indonesian Remanufacturing Company. Masters thesis, Swiss German University.

Chorda, Martinus and Nasution, Henry and Sofyan, Edi (2021) Optimization Cutting Parameters on Turning Process to Increasing Surface Roughness SKT4 Material with Taguchi Method. Masters thesis, Swiss German University.

Chrisnariyanto, Theodorus and Umniyati, Yunita and Saraswati, Triarti (2021) Designing and Constructing an Automatic Hand Washer for Elementary School Children with Adjustable Sink. Bachelor thesis, Swiss German University.

Christian, Yongky Felix and Rusyadi, Rusman and Rusli, Leonard P. (2021) Mung Beans Quality Detection Using Machine Vision. Bachelor thesis, Swiss German University.

E

Egustian, Muhammad Farhan and Sinaga, Erikson F. (2021) Development and Performance Analysis of Wireless Charging System for Physics Laboratory’s Apparatus in Swiss German University. Bachelor thesis, Swiss German University.

Emawan, Dedi and Pratama, Aditya T. and Nasution, Henry (2021) Developing Tools for Measuring Performance of Gas Engine Power Plants: A Case Study at Leading Medium Energy Company in Indonesia. Masters thesis, Swiss German University.

Eridheni, Stenli Octavian and Nasution, Henry and Berchmans, Hanny J. (2021) Implementation of Microcontroller in Lubricant Viscosity Measurement Tool. Masters thesis, Swiss German University.

Evangelista, Eunike Anastasia and Sofianti, Tanika D. and Baskoro, Gembong (2021) Analytical Hierarchy Process (AHP) for Selection of Project Management Software to Support Remote Working: A Case Study at Logistics Division of a National EPC Company in Indonesia. Masters thesis, Swiss German University.

F

Fadlulloh, Muhammad Mushlih and Pratama, Aditya T. and Nasution, Henry (2021) Enhancing Maintenance Management System Using Reliability Centred Maintenance (RCM) Case Study Curing Tire Section at Leading Tire Manufacturer. Masters thesis, Swiss German University.

Firmansyah, Ali and Pratama, Aditya T. and Sofianti, Tanika D. (2021) Improvement Put Away Process with Class-Based and Dedicated-Based Storage in Spare Part Warehouse PT. Tire Indonesia. Masters thesis, Swiss German University.

Fulbert, Alvin and Rusli, Leonard P. (2021) Design and Implementation of Smart Laundry Facility: Locker, Payment, Detergent, Machine Integration. Bachelor thesis, Swiss German University.

G

Garinto, Dodi and Berchmans, Hanny J. and Hendriana, Dena (2021) Analysis and Design of Medium Voltage Three-Phase AC-DC Power Conversion for Wind Energy Systems. Masters thesis, Swiss German University.

Garry, Garry and Rusli, Leonard P. and Kristian, Nova (2021) Small Scale Automated Coil Winding Machine. Bachelor thesis, Swiss German University.

Geofany, Geofany and Manurung, Edward Boris (2021) Robot Checkers Player. Bachelor thesis, Swiss German University.

Gumilar, Egi and Hendriana, Dena and Berchmans, Hanny J. (2021) Study of Rooftop Solar PV Policies that Have an Impact On Techno-Economic, and Socio-Environment in a Leading Heavy Equipment Company in Indonesia. Masters thesis, Swiss German University.

H

Hapsari, Daniela Dea and Sumarsono, Sumarsono and Baskoro, Gembong (2021) Improving Waste Management System of Leading Construction Firm in Indonesia: A Study in Notable High-Rise Building Project in Jakarta. Masters thesis, Swiss German University.

Hartanto, Muhammad Rifki and Rusyadi, Rusman (2021) Application of Face Mask Recognition and Body Temperature Sensor for Attendance Machine. Bachelor thesis, Swiss German University.

Hartono, Hartono and Baskoro, Gembong and Sumarsono, Sumarsono (2021) Improving Quality on Tire Curing Process by Using Six Sigma and Failure Mode and Effects Analysis (FMEA) Method in Indonesia Leading Tire Manufacturer. Masters thesis, Swiss German University.

Helmi, Moch. Fatchul and Sumarsono, Sumarsono and Baskoro, Gembong (2021) Improving the Silica Stock Level on Controlling Raw Material Inventories Using the Periodic Review Power Approximation Method in Indonesian Leading Tire Manufacturer. Masters thesis, Swiss German University.

Hemas, Nur Kamaarum Adiwida and Sudarto, Sumarsono and Pratama, Aditya T. (2021) Improving Warehouse Management System at The Largest Heavy Equipment Distributor Company in Indonesia With Simulation-Based Optimization Approach. Masters thesis, Swiss German University.

I

Ichramputera, Muhammad Randa and Rusli, Leonard P. (2021) Electrical and Interface Display on Electric Motorcycle. Bachelor thesis, Swiss German University.

J

Janto, Salim and Nasution, Henry and Sofyan, Edi (2021) Improving HVAC Indoor Air Quality for Healthy Buildings. Masters thesis, Swiss German University.

K

Kaldjat, Iwan Kendarwan and Pratama, Aditya T. and Hendriana, Dena (2021) A Study on Sensible Excise Policy by Considering Acceptable Industry Volume, Government Revenue and Employment for Hand Made Kretek Cigarettes. Masters thesis, Swiss German University.

Kurniawan, Hendra and Budiarto, Eka and Soetomo, Moh. A. Amin (2021) Digital Transformation for Improve Debt Collection Process on Spare Parts Transaction in Leading Heavy Equipment Company. Masters thesis, Swiss German University.

L

Liang, Steven and Pratama, Aditya T. and Sumarsono, Sumarsono (2021) Improving Daily Total Complete Shipment by Using System Dynamics Simulation in an Indonesian Car Spare Parts Manufacturer. Masters thesis, Swiss German University.

M

Marcello, Andrian and Sinaga, Erikson F. and Rusyadi, Rusman (2021) Improvement of Securina – Card Exchange Kiosk. Bachelor thesis, Swiss German University.

Martawidjaja, Henry and Budiarto, Eka and Soetomo, Moh. A. Amin (2021) Procurement Framework Analysis and Evaluation of E-Procurement Implementation Adoption Using UTAUT Model (Case Study in Indonesia Leading Heavy Equipment Company). Masters thesis, Swiss German University.

Maryono, Maryono and Sofyan, Edi and Hendriana, Dena (2021) Impact of Service Engineer Development to Improve Quality of Technical Service Information Report of Heavy Equipment Failure. Masters thesis, Swiss German University.

Mulyawanto, Budi and Hendriana, Dena and Baskoro, Gembong (2021) Improving Innovation Management Implementation as Part of The Consistent Application of the Strategic for Business Growth. Masters thesis, Swiss German University.

P

Pamungkas, Muhammad Nur and Hendriana, Dena (2021) Implementation of Low RPM Generator for Wind Turbine. Bachelor thesis, Swiss German University.

Panggayuh, Stefanus Diyan and Syahriar, Ary and Hendriana, Dena (2021) To Extend Battery Life for Electrical Switchboard by Using Three Stages Charging Method. Masters thesis, Swiss German University.

Prasetyo, Andri and Berchmans, Hanny J. and Nandar, Cuk Supriyadi Ali (2021) Travel Mis-Operation Prevention Using Automatic Warning System for Excavator. Masters thesis, Swiss German University.

Prasetyo, Satriyo Widy and Baskoro, Gembong and Hendriana, Dena (2021) Integrating Audit System of AGC, ISO 14001, ISO 45001 to Improve Implementation of the Management Systems in Leading Heavy Equipment Companies. Masters thesis, Swiss German University.

Priyanto, Hanif and Baskoro, Gembong and Sofyan, Edi (2021) Effective Performance Management Design on Remote Workforce Environment Using Integrated Seven Tools of Quality Control Analysis for Top Talent Employee Human Asset Value (HAV) Quadrant 1-4 In United Tractors. Masters thesis, Swiss German University.

Putra, Albherd Ramadhan and Sudarto, Sumarsono and Pratama, Aditya T. (2021) Improving Material Efficiency on Calendering Process by Using Six Sigma and Define Measure Analyze Improve Control (DMAIC) Methods in Indonesian Leading Truck Bus Bias Tire Manufacturer. Masters thesis, Swiss German University.

R

Rachmat, Basuki and Hendriana, Dena and Soetomo, Moh. A. Amin (2021) Safety and Health Campaign to Improve Environment Occupational Safety and Health in Indonesia Leading Distributor Heavy Equipment Company. Masters thesis, Swiss German University.

Rachmat, Muhamad Lutfi and Nasution, Henry and Setiawan, Widi (2021) Design Clutch Wear Monitoring to Provide the Right Time to Change the Clutch and Prevent Unscheduled Breakdown on Heavy Duty Trucks. Masters thesis, Swiss German University.

Ramdan, Yoki Andriawan and Setiawan, Widi and Sofyan, Edi (2021) Development of Embedded Image Processing to Classify, Determine and Control Nutrient Deficiency of Plantation in Hydroponic System. Masters thesis, Swiss German University.

Ridwan, Kevin Ocnald and Rusli, Leonard P. (2021) Conversion Kit Prototype for Conventional Manual Transmission Motorcycle. Bachelor thesis, Swiss German University.

Rizki, Ananda Tri and Baskoro, Gembong and Mariza, Ita (2021) Supply and Demand Analysis by Comparison of Forecasting Method in Manufacturing Motorcycles Tires. Masters thesis, Swiss German University.

S

Sandi, Aditya and Sinaga, Erikson F. (2021) Design and Implementation of Temperature Control and Dimmer Controlled Speed for Extruder Machine to Recycle Shredded 3D Printed Products Made of Poly (Lactic Acid). Bachelor thesis, Swiss German University.

Santoso, Warno and Baskoro, Gembong and Sofyan, Edi (2021) The Impact of Lean Organization to Employee Cost in Indonesia Largest Heavy Equipment Distributor Company. Masters thesis, Swiss German University.

Sarwono, Edhie and Baskoro, Gembong and Sudarto, Sumarsono (2021) The Impact of Work from Home During Covid-19 Pandemic to Human Capital Organizational Effectiveness in Indonesia Leading Heavy Equipment Company. Masters thesis, Swiss German University.

Sebastian, Cevel and Rusli, Leonard P. (2021) Sorting Machine Based 0n Weight by Using Load Cell. Bachelor thesis, Swiss German University.

Setiono, Teguh and Sofyan, Edi and Hendriana, Dena (2021) Impact of Increasing Mechanic Competence Through Competency Based Curriculum to Improve Product Support Performance in Leading Indonesian Heavy Equipment Companies. Masters thesis, Swiss German University.

Sibarani, Prince and Sofianti, Tanika D. and Pratama, Aditya T. (2021) Improving the Overall Equipment Effectiveness (OEE) of Drum Testing Machine in Laboratory of Tire Manufacturing Using FMEA and PFMEA. Masters thesis, Swiss German University.

Sidharta, Vinlen Aston and Rusli, Leonard P. and Rusyadi, Rusman (2021) Development of Scaled-Down Self-Driving for Last Mile Delivery Based on Ros 2 Steering and Obstacle Recognition System. Bachelor thesis, Swiss German University.

Suhartinah, Suhartinah and Berchmans, Hanny J. and Nasution, Henry (2021) Development Monitoring and PID Control of an Environmental Testing Chamber Using Node Red. Masters thesis, Swiss German University.

Syaefudin, Adhy and Sofyan, Edi and Setiawan, Widi (2021) Computer Vision Inspection of Cold-Flow Casting Defect with Neural Network. Masters thesis, Swiss German University.

Syahputra, Herryan and Hendriana, Dena and Baskoro, Gembong (2021) Improvement in Reusable Part Quality to Prolong Remanufactured Product Lifetime for Leading Heavy Equipment Remanufacturing Company in Indonesia. Masters thesis, Swiss German University.

T

Tarigan, Elroy FKP and Hendriana, Dena and Syahriar, Ary (2021) Design and Development of Battery Management Systems in Passenger Electric Vehicles Prototype. Masters thesis, Swiss German University.

U

Utomo, Hermawan Aji and Sofianti, Tanika D. and Sumarsono, Sumarsono (2021) Improving Quality of Mixture Process Based on Machine Management for Rework on Rubber Compounding Using Analytical Hierarchy Process (AHP) Approach In Indonesian Leading Tire Manufacturer. Masters thesis, Swiss German University.

W

Wibowo, Anang Wahyu and Baskoro, Gembong and Sudarto, Sumarsono (2021) Improving the Prediction and Accuracy of Parts Marketing Promotion Program for Heavy Equipment Spare Parts Business Through Digitalization Approach. Masters thesis, Swiss German University.

Wibowo, Eko Ari and Sofyan, Edi and Syahriar, Ary (2021) Optimization Warpage Defects of Pencil Box by Using Finite Element Analysis and Artificial Neural Networks. Masters thesis, Swiss German University.

Wicaksono, Andreadie and Berchmans, Hanny J. and Nasution, Hennry (2021) Design and Development Body Temperature Sensor for Attendance Machine and Security Gate. Masters thesis, Swiss German University.

Widiatmoko, Fuad and Berchmans, Hanny J. and Setiawan, Widi (2021) Computer Vision and Deep Learning Approach for Social Distancing Detection During Covid-19 Pandemic. Masters thesis, Swiss German University.

Widjaja, Ferdinand and Hendriana, Dena and Budiarto, Eka (2021) Predictive Maintenance of Mining Equipment in Indonesia Leading Heavy Equipment Company. Masters thesis, Swiss German University.

Wijaya, Kevin Indra and Umniyati, Yunita and Sinaga, Erikson F. (2021) Electric Energy Storage System (EESS) Using Saltwater Electrolytes. Bachelor thesis, Swiss German University.

Witono, Nicolas Albert and Rusyadi, Rusman and Rusli, Leonard P. (2021) Development of Scaled-Down Self-Driving Car for Last Mile Delivery Based on ROS2. Bachelor thesis, Swiss German University.

Wong, Reynaldi and Rusyadi, Rusman (2021) Development of Securina – Self Check-In Kiosk with Card Dispensing and Storage Mechanism in Compliance with Data Recording Prototype. Bachelor thesis, Swiss German University.

Y

Yolanda, Dave Oktavianus and Rusli, Leonard P. and Budiarto, Eka (2021) Bionic Hand Integration with EMG Sensors. Bachelor thesis, Swiss German University.

Yuni, Robi Tubagus and Hendriana, Dena and Nandar, Cuk Supriyadi Ali (2021) Monitoring Heavy Equipment Coolant Temperature to Prevent Engine Overheat Using IoT. Masters thesis, Swiss German University.

Z

Zavellino, Vincent and Sinaga, Erikson F. and Rusli, Leonard P. (2021) Reverse Vending Machine and Crusher Integration and Improvement. Bachelor thesis, Swiss German University.