Adrianto, Mikael and Rusli, Leonard P. and Widjaja, Benny (2018) Automated Nata De Coco Cutting Machine (X-Cut & Collision Detection). Bachelor thesis, Swiss German University.

Amidya, Agatha and Baskoro, Gembong (2018) Pengaruh Bentuk Alat Potong Bujur Sangkar dan Oktagonal Terhadap Ketahanan dan Kekasaran Permukaan Pada Proses Milling. Seminar Ilmiah Teknologi ATMI Cikarang (SinTAC) 2018. ISSN 2622-11011

Ardita, Eduardo and Hendriana, Dena and Syahriar, Ary (2018) Modeling and Design Optimization of Folding Table Frame Using Solidworks Software. Masters thesis, Swiss German University.

Astrianto, Heribertus Guntur and Berchmans, Hanny J. and Iskandar, Aulia Arif (2018) Monitoring Level of Gasoline Tank in Gasoline Pump Station Using Arduino by Displaying on LCD and Using IP Address on The Website. Masters thesis, Swiss German University.

Audrian, Evan and Widjaja, Benny and Rusyadi, Rusman (2018) Implementation Of Google Maps Navigation For Self-Driving Car With Electrical Power Steering. Bachelor thesis, Swiss German University.

Bernard, Joshua and Widjaja, Benny and Rusli, Leonard P. (2018) Design And Construction Of Feeding And Stacking Machine for Cutlery Utensils Magazine. Bachelor thesis, Swiss German University.

Budiarso, Ezra Clement and Rusyadi, Rusman and Budiarto, Eka (2018) Design And Construction TurtleBot 3 Base Robot With Autonomous Driving. Bachelor thesis, Swiss German University.

Dani, Andreas Meifyanno and Rusyadi, Rusman and Widjaja, Benny (2018) 6 Degree of Freedom Arm Robot Path Planning Using Robot Operating System Moveit! Bachelor thesis, Swiss German University.

Dewata, Amadea Widi and Berchmans, Hanny J. and Iskandar, Aulia Arif (2018) Prototyping 4 Degree of Freedom Robot Arm For Kinematic and Dynamic Analysis. Masters thesis, Swiss German University.

Dirgantara, Mohammad Ryan and Budiarto, Eka and Rusyadi, Rusman (2018) Validating The Mathematical Modelling On The Hector Quadrotor In ROS And Creating The 3D Path Planning Simulation Using Gazebo Simulator. Bachelor thesis, Swiss German University.

Edbert, Andrew and Sinaga, Erikson F. and Rusyadi, Rusman (2018) Development And Analysis Of Brushless Direct Current (BLDC) Motor Test Unit Using Vedder Electronic Speed Controller (VESC). Bachelor thesis, Swiss German University.

Ekawangsha, Rafli and Widjaja, Benny and Rusli, Leonard P. (2018) Design And Construction Of A Machine To Automate De-stacking Mechanism Of Cutlery. Bachelor thesis, Swiss German University.

Elroy, Arthur and Hanafi, Cepi Mohamad (2018) Controlling Muffle Furnace By Using PLC For Hardening Tool Steel. Bachelor thesis, Swiss German University.

Feraldo, Feraldo and Budiarto, Eka and Rusyadi, Rusman (2018) Analysis And Implementation Of Hand Gesture Classification From Surface Electromyography (SEMG) Signal Using Myo Armband For Bionic Hand. Bachelor thesis, Swiss German University.

Fernandes, Angga William and Hendriana, Dena and Sofyan, Edi (2018) Analysing Effect of Canny Edge Detection in Image Measurement of Stainless Steel Product. Masters thesis, Swiss German University.

Fernandez, Victor and Berchmans, Hanny J. and Hendriana, Dena (2018) Dynamic Response Regulations of Extrusion Molding Machine Through Mathematical Modeling and Simulations. Masters thesis, Swiss German University.

Gunawan, Cynthia and Rusyadi, Rusman and Sinaga, Erikson Ferry (2018) Development Of Low Cost LIDAR For ROS Based Robots. Bachelor thesis, Swiss German University.

Gunawan, Michelle Steffi and Sofyan, Edi and Hendriana, Dena (2018) Crane Rail Measurement Tool – Rail Rover. Masters thesis, Swiss German University.

Hartono, Bibit and Sofyan, Edi and Setiawan, Widi (2018) Analysis Effective Utilization of Microcontroller Port for Enhancing Optimization Hardware. Masters thesis, Swiss German University.

Hartono, Mesakh Kristia and Hendriana, Dena (2018) Construction of Electrical Power Generation using Hybrid Renewable Energy for Local Communities. Bachelor thesis, Swiss German University.

Hindarianto, Jepi Yuli and Berchmans, Hanny J. and Setiawan, Widi (2018) Analysis of Power Quality Effect on the Life Time Transformer. Masters thesis, Swiss German University.

Hydanta, Wildan and Rusli, Leonard P. and Widjaja, Benny (2018) Flanging Machine For Food And Beverages Stainless Steel Plate Bending / Tank. Bachelor thesis, Swiss German University.

Irawan, Kevin and Rusyadi, Rusman (2018) Development Of Delta Robot As Automatic Sorting, Picking, And Placing Robot Using Robot Operating System. Bachelor thesis, Swiss German University.

Irawan, Richard and Sinaga, Erikson Ferry (2018) Redesigning A Small-Scaled Reverse Vending Machine To Improve The Process And Performance. Bachelor thesis, Swiss German University.

Joseph, Calvin and Widjaja, Benny and Rusli, Leonard P. (2018) Design And Construction Of An Automated Machine For Cast Mould Separation And Pick And Place Male Mould. Bachelor thesis, Swiss German University.

Kurniawan, Hery Agung and Baskoro, Gembong and Sofyan, Edi (2018) Motor Current to Predict Surface Smootheness Quality on the Taper Hole of Anchor Block. Masters thesis, Swiss German University.

Kurniawan, Hery Agung and Taryana, Tatang and Baskoro, Gembong (2018) Arus Listrik Motor Spindle Mesin Milling Sebagai Parameter Presisi Tingkat Kekasaran Permukaan Benda Kerja. Prosiding Seminar Ilmiah Teknologi ATMI Cikarang 2018. ISSN 2622-11011

Kurniawan, Laurentius Soni and Hendriana, Dena and Iskandar, Aulia Arif (2018) Modelling of Machining Parameters to Predict The Surface Roughness Using Multiple Regression and Neural Network. Masters thesis, Swiss German University.

Kwok, Brandon and Ortjohann, Egon and Rusyadi, Rusman (2018) Further Development And Implementation Of Software Architecture For Smart Grid Controller. Bachelor thesis, Swiss German University.

Lieberty, William and Widjaja, Benny (2018) Self-Balancing Spherical Wheel Robot. Bachelor thesis, Swiss German University.

Livia, Livia and Widjaja, Benny (2018) Design And Construction Of An Automated System For Contact Lens Extraction From The Male Mould. Bachelor thesis, Swiss German University.

Mahardika, Ellya and Berchmans, Hanny J. and Sofyan, Edi (2018) Design, Simulation and Build of Monitoring and Control System for Stand Alone Solar PV-Battery Power Supply System. Masters thesis, Swiss German University.

Matthew, Derrin and Rusyadi, Rusman (2018) Development of AGV Robot with Vision to Detect QR Code as Navigation Point. Bachelor thesis, Swiss German University.

Mutairi, Abdallah Waddah A. A. and Hendriana, Dena and Sofyan, Edi (2018) WSN Robot for Unreachable Areas. Masters thesis, Swiss German University.

Najib, Adil and Rusyadi, Rusman (2018) Developing Object Detection Algorithm for Delta Robot as Automatic Sorting, Picking, and Placing Robot Using ROS. Bachelor thesis, Swiss German University.

Narendraputra, Adimas and Budiarto, Eka and Kidarsa, Lydia (2018) Close Loop - Controlled Lightweight Hips Exoskeleton. Bachelor thesis, Swiss German University.

Nugroho, Ardi and Hendriana, Dena and Syahriar, Ary (2018) Analysis and Comparison of 3D Laser and Scanning Technology to Measure The Accuracy Of Actual Products to Design. Masters thesis, Swiss German University.

Octaviana, Rosalyn Dwi and Widjaja, Benny and Rusyadi, Rusman (2018) Real Time Kinematic Global Navigation Satellite System – Multipath Detection And Optimization For Autonomous Car Navigation Using Electric Power Steering. Bachelor thesis, Swiss German University.

Orlandi, Rando and Baskoro, Gembong and Sofyan, Edi (2018) Analysis Of Effect Variation Relief Angle On The ISO 6 Cutting Tool To The Surface Roughness And Wear Level. Masters thesis, Swiss German University.

Panuntun, Mathius Wagyantoro Resi Bagus and Sofyan, Edi and Berchmans, Hanny J. (2018) Accelerometer-Based System to Evaluate The Wear of Lathe Cutting Tool and The Correlation to Surface Quality. Masters thesis, Swiss German University.

Pradipta, Adhika and Sofyan, Edi and Berchmans, Hanny J. (2018) Optimization Analysis of Motor and Control System in Automatic Filling Machine. Masters thesis, Swiss German University.

Prastiwi, Listyantomo Budhi and Syahriar, Ary and Berchmans, Hanny J. (2018) Geometry Effects Of Carbide Cutting Tool Angle To The Tool Life And Wear Of The Lathe Process On S45C By Using ANSYS Software. Masters thesis, Swiss German University.

Pribadi, Martin Thomas Sadmoko Adi and Syahriar, Ary and Baskoro, Gembong (2018) The Effect Of The Workpiece’s Shape And Type Of Material Against The Size Distorsion In Hardening Process. Masters thesis, Swiss German University.

Putra, Adhiyasa Mahendra and Rusli, Leonard P. and Widjaja, Benny (2018) Automated Nata De Coco Cutting Machine (Double Moving Blades). Bachelor thesis, Swiss German University.

Putra, Agatha Amidya and Syahriar, Ary and Baskoro, Gembong (2018) Shape Influence of The Cutting Tools in Milling Process On Its Endurance and Surface Roughness in Dry Cutting. Masters thesis, Swiss German University.

Qiu, Reinaldo and Budiarto, Eka and Rusli, Leonard P. (2018) Design And Construction Of Bicycle Motion Simulator: Mechanical And Structural Analysis For Climb And Descent Simulation. Bachelor thesis, Swiss German University.

Rabbani, Arfyan and Schwung, Andreas and Rusyadi, Rusman (2018) The Application Of Deep Learning For Condition Monitoring And Fault Diagnosis Of Industrial Processes. Bachelor thesis, Swiss German University.

Ramadhan, Mohammad Ryan Avila and Widjaja, Benny (2018) Analysis of Regenerative Braking Using Brushed DC Motor. Bachelor thesis, Swiss German University.

Renaldy, Renaldy and Ortjohann, Egon and Rusyadi, Rusman (2018) Further Development And Implementation Of Browser-Based User Interface For Smart Grid Controller. Bachelor thesis, Swiss German University.

Ritanto, Didit and Berchmans, Hanny J. and Hendriana, Dena (2018) Reverse Engineering of an Outside Jaw of Self-Centering Chuck. Masters thesis, Swiss German University.

Sadewa, Bagas Anjar and Berchmans, Hanny J. and Syahriar, Ary (2018) Design and Implementation of Saxophone Mouthpiece ny Analyze The Air Flow Using Computational Fluid Dynamic to Produce Different Sound Character. Masters thesis, Swiss German University.

Setiyawan, Bambang and Baskoro, Gembong (2018) Rekayasa Kekerasan Material Mild Steel Dalam Proses Difusi Karbon. Prosiding Seminar Ilmiah Teknologi ATMI Cikarang. ISSN 2622-11011

Setiyawan, Bambang and Syahriar, Ary and Baskoro, Gembong (2018) Pack Carburizing : an Experimental Study of Mild Steel Carbon Diffusion on Surface Heat Treatments. Masters thesis, Swiss German University.

Setyawan, Albertus Agung Dananto and Sofyan, Edi and Hendriana, Dena (2018) Analysis of ESP8266 Module Accuracy for Wifi Network Based Indoor Positioning System. Masters thesis, Swiss German University.

Sujiwo, Edy and Setiawan, Widi and Sofyan, Edi (2018) Application of A Non-Contact Laser in Profile Measurement. Masters thesis, Swiss German University.

Susanto, Gabriel Hendri and Syahriar, Ary and Baskoro, Gembong (2018) Analysis of Stress and Deflection of Runway Beam Components in Frame Hoist with 3D Solidworks Software. Masters thesis, Swiss German University.

Susanto, Hendro and Sofyan, Edi and Iskandar, Aulia Arif (2018) Designing and Implementation of A Simple Robotic Arm for Loading and Unloading Products on a Press Machine. Masters thesis, Swiss German University.

Sutrisno, Yulius Nanang and Syahriar, Ary and Iskandar, Aulia Arif (2018) Analysis Kenetic Energy From Speed Bump To Generate Electricity. Masters thesis, Swiss German University.

Tejakahana, Aloisius Ivan and Widjaja, Benny and Rusyadi, Rusman (2018) Automatic Motors-Height Adjuster For Spherical Wheel. Bachelor thesis, Swiss German University.

Timothy, Ignatius Brian and Rusli, Leonard P. and Hanafi, Cepi Mohamad (2018) Escargot Sorting Machine By Gravitational Separator. Bachelor thesis, Swiss German University.

Tjandra, Davin and Widjaja, Benny (2018) Designing And Constructing A Contact Lens Mold Rotary Feeder. Bachelor thesis, Swiss German University.

Triyanto, Agus and Setiawan, Widi and Syahriar, Ary (2018) Energy Consumption Analysis to Detect Process Failure in Rubber Compound Mixing Process. Masters thesis, Swiss German University.

Wibowo, Singgih Aji and Setiawan, Widi and Hendriana, Dena (2018) Failure Detection Of Tires Rotating On Drum By Using Vibration Sensor Analysed With Fast Fourier Transform. Masters thesis, Swiss German University.

Widianto, Renaldo and Rusli, Leonard P. and Widjaja, Benny (2018) Automated Nata De Coco Cutting Machine (Cutting And Transfer Method). Bachelor thesis, Swiss German University.

Widiyatmoko, Alfonsus Tri and Setiawan, Widi and Iskandar, Aulia Arif (2018) Web-Based Real-Time Energy Monitoring for Loyola Building at ATMI Cikarang. Masters thesis, Swiss German University.

Widjanarko, Dimas Anindito and Budiarto, Eka and Kidarsa, Lydia (2018) Knee Exoskeleton With Control System And Pneumatic Air Muscle Actuation. Bachelor thesis, Swiss German University.

Wijayanti, Sylvia Hadiani and Sofyan, Edi and Berchmans, Hanny J. (2018) Optimization Analysis Of Pneumatic System In Automatic Filling Machine. Masters thesis, Swiss German University.

Wiranata, Aldrian and Budiarto, Eka and Sinaga, Erikson F. (2018) Development Of Location Based Haptic Feedback Vest. Bachelor thesis, Swiss German University.

Yohan, Aditya and Rusli, Leonard P. and Rusyadi, Rusman (2018) Design And Development Of Miniature Dynamometer For Educational Laboratory Purposes. Bachelor thesis, Swiss German University.

Yudatama, Andre Sudi and Hendriana, Dena (2018) Designing and Developing Of 2-Stage 2-Bladed Savonius Vertical Axis Wind Turbine Under Low Speed Wind Condition. Bachelor thesis, Swiss German University.

Yunanto, Yunanto and Setiawan, Widi and Iskandar, Aulia Arif (2018) Design And Implementation Inspection Spot Welding Part With Image Processing. Masters thesis, Swiss German University.