Items where Division is "Faculty of Engineering and Information Technology > Department of Mechatronics Engineering" and Year is 2020

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | E | H | K | L | N | O | P | R | S | T | U | V | W | Y
Number of items: 36.

A

Amadis, Mikael and Sinaga, Erikson F. and Umniyati, Yunita (2020) Development of A Variable Speed Hollow Conductor Loop Apparatus To Be Implemented for Leybold induction By Means of A Variable Magnetic Field Experimental Module. Bachelor thesis, Swiss German University.

Aveka, Aveka and Rusli, Leonard P. and Jonathan, Steven (2020) Delta Robot Fourth Axis. Bachelor thesis, Swiss German University.

B

Budiatmadjaja, William and Rusyadi, Rusman and Steinhage, Axel (2020) Design and Construction of an Indoor People Counting System using SensFloor® and Computational Neural Network. Bachelor thesis, Swiss German University.

C

Christofle, Samuel and Sinaga, Erikson F. and Umniyati, Yunita (2020) Implementation of Stereo Vision on Two-Dimensional Motion on Air Table for Physics Laboratory in Swiss German University. Bachelor thesis, Swiss German University.

E

Edrick, Edrick and Rusyadi, Rusman (2020) Outdoor AMR Using Robot Operating System (ROS) and GNSS. Bachelor thesis, Swiss German University.

H

Hagi, George and Rusli, Leonard P. (2020) Improvement of Escargot Sorting Based on Weight By Using Electromagnetics. Bachelor thesis, Swiss German University.

Hakim, Jeremia and Berchmans, Hanny J. and Baskoro, Gembong (2020) Design and Development of Low Cost Data Acquisition System for Solar PV Power Plant Monitoring. Masters thesis, Swiss German University.

Hartono, Alvin Tri and Rusli, Leonard P. and Rudijanto, Rudijanto (2020) Development of Automated Pillbox With IoT Features for PT. Pharos indonesia. Bachelor thesis, Swiss German University.

Haryadi, Setyo and Hendriana, Dena and Nandar, Cuk Supriyadi Ali (2020) Monitoring of Thermostat Performance in Heavy Equipment Diesel Engine Cooling System Using an Ultrasonic Flow Meter. Masters thesis, Swiss German University.

K

Kardana, Yohanes Acep Nanang and Berchmans, Hanny J. and Nandar, Cuk Supriyadi Ali (2020) Fuel Level Monitoring and Security Warning Tools Using IOT For Komatsu Excavator PC200-8M0. Masters thesis, Swiss German University.

Kusnadi, Alvin and Umniyati, Yunita and Budiarto, Eka (2020) Heat Transfer Apparatus. Bachelor thesis, Swiss German University.

L

Louiscious, Heverett and Rusli, Leonard P. and Galinium, Maulahikmah (2020) Securina – Self Check-in Kiosk with Card Dispensing and Storage Mechanism in Compliance with Data Recording. Bachelor thesis, Swiss German University.

N

Ngasinur, Jeffry and Rusyadi, Rusman and Galinium, Maulahikmah (2020) Further Development of Existing Autonomous Mobile Robot. Bachelor thesis, Swiss German University.

O

Ongkowijoyo, Yeremia Kevin and Pratama, Aditya T. and Sofianti, Tanika D. (2020) Developing A Kanban System To Improve The Supply Chain in A Local Toy Manufacturing Company. Bachelor thesis, Swiss German University.

P

Prajitno, Harold and Rusyadi, Rusman (2020) Autonomous Mobile Robot Based on Golf Cart Frame Using Gazebo. Bachelor thesis, Swiss German University.

Pratama, Agustinus and Sinaga, Erikson F. and Rusli, Leonard P. (2020) Development of Crusher for Reverse Vending Machine. Bachelor thesis, Swiss German University.

Putra, Giovanni Firdaus and Manurung, Edward Boris and Rusli, Leonard P. (2020) Electric Oven Development for Wafer Stick Machine. Bachelor thesis, Swiss German University.

R

Ronadi, Ivan Goldy and Sinaga, Erikson F. and Manurung, Edward Boris (2020) Small Scale Reverse Vending Machine Improvement and Refurbishment. Bachelor thesis, Swiss German University.

S

Sadono, Sri and Nandar, Cuk Supriyadi Ali and Hendriana, Dena (2020) Modeling, Simulation, and Analysis of Auto Warming Up and Overheat Prevention System in Komatsu Hydraulic Excavator PC200-8. Masters thesis, Swiss German University.

Satriajaya, Audrey and Rusli, Leonard P. and Budiarto, Eka (2020) Mechanical Design of a 3D Printed Bionic Hand. Bachelor thesis, Swiss German University.

Satrijo, Deo Marcellino Njoto and Sinaga, Erikson F. (2020) Automatic Panorama Head With PID Controller and Face Tracking. Bachelor thesis, Swiss German University.

Sim, Fabio Milentiansen and Budiarto, Eka and Rusyadi, Rusman (2020) Neural Solvers for Differential Equations Applied in Physical Systems. Bachelor thesis, Swiss German University.

Soraya, Herlin and Setiawan, Widi and Hendriana, Dena (2020) Implementation of pH Controller in Tissue Machine Production. Masters thesis, Swiss German University.

Suharsono, Richard Adhinata and Manurung, Edward Boris and Rusli, Leonard P. (2020) Ball and Plate System with PID Control. Bachelor thesis, Swiss German University.

Suhartono, Fredric Novando and Rusyadi, Rusman (2020) Object Dimension and Weight Detection and Classification System for Cargo. Bachelor thesis, Swiss German University.

Susantio, Billy and Budiarto, Eka and Sinaga, Erikson F. (2020) New Sensor Development for Bionic Hand. Bachelor thesis, Swiss German University.

Sutiawan, Sutiawan and Hendriana, Dena and Berchmans, Hanny J. (2020) Design and Analysis of Warning System for Aircraft Wingtip Proximity to Hangar Column Using Ultrasonic Sensor. Masters thesis, Swiss German University.

Sutrisno, Marvin Rainardi and Sinaga, Erikson F. (2020) Development of Quadrupedal Sprawling Robot for Traversing Rough Terrain and Monitoring. Bachelor thesis, Swiss German University.

Sutrisno, Rich and Rusyadi, Rusman and Budiarto, Eka (2020) Autonomous Obstacle Avoidance for Quadcopter. Bachelor thesis, Swiss German University.

T

Turjono, Einser Nahiman and Manurung, Edward Boris and Rusli, Leonard P. (2020) Gas Burner System Improvement. Bachelor thesis, Swiss German University.

U

Uetama, Tri Randi and Setiawan, Widi and Sofyan, Edi (2020) Real Time Image Processing Face Recognition for Security System. Masters thesis, Swiss German University.

V

Valen, Valen and Sinaga, Erikson F. (2020) Coin Counting and Wrapping Machine. Bachelor thesis, Swiss German University.

W

Wiastomo, Rayhan Landep and Sinaga, Erikson F. and Umniyati, Yunita (2020) Modelling and Developing a Freeze-Drying Machine Using Matlab Simulink. Bachelor thesis, Swiss German University.

Wijaya, Reynaldi and Sofianti, Tanika D. and Awibowo, Setijo (2020) Improvement and Implementation of Production Training Center at a German Automotive Manufacturing Company. Bachelor thesis, Swiss German University.

Wirjono, Wilvan Gunawan and Rusyadi, Rusman (2020) Prototype Development of Autonomous Mobile Robot with indoor Navigation to Deliver Goods. Bachelor thesis, Swiss German University.

Y

Yauwira, Gabrielle Glenda and Rusli, Leonard P. and Fideliant, Kamilo (2020) Designing a Lotion Mixer as a Home Appliance. Bachelor thesis, Swiss German University.

This list was generated on Fri May 20 00:46:16 2022 WIB.