Baskoro, Gembong (2023) University to Industry Knowledge Transfer: From Academic to Practice. In: Seminar Nasional Technopex 2023, October 25, 2023, ITI, Serpong-Indonesia.

Tri Handajani, Endang and Baskoro, Gembong (2022) Increasing Employee Engagement Through Quality of Internal Communication with a Hybrid Method in One of the Largest Trading Company in Indonesia. In: International Conference on Engineering Management and Sustainable Innovative Technology 2022, November 3-4, 2022, Bali, Indonesia. (Submitted)

Baskoro, Gembong (2022) Effectiveness and Efficiency of Online Education: An Experiential Study During Pandemic. In: Seminar Nasional Technopex 2022, October 26, 2022, ITI, Serpong-Indonesia.

Baskoro, Gembong (2022) From VUCA to BANI: A challenge of strategic environment for higher education in Indonesia. The 3 rd International Conference on Business and Engineering Management 2022.

Baskoro, Gembong (2021) IMPORTANCE OF RAPID ADAPTATION OF VALUE PROPOSITION TO THE CUSTOMER WANTS: a dynamic change in customer wants due to pandemic of Covid 19. Pressures of pandemic Covid 19 and rapid technology development of Artificial Intelligence (AI), Big Data, Internet of Things (IoT), and IT based technology lead to the dynamic, sometimes unpredictable, change of customer wants. The dynamic change of cus, 5 (1). ISSN 2622-4771

Baskoro, Gembong (2021) Reducing Scrap of Cement A3CM-05 by Using PDCA (Plan Do Check Action) and QCC (Quality Control Circle) Method in an Indonesia Leading Tire. Proceedings The 3rd International Conference on Business and Management of Technology. ISSN 9786233180290

Baskoro, Gembong (2021) Strive Reliable Heavy Equipment Main Component Lifetime with Oil Monitoring System in Condition based Maintenance Implementation Through IoT. Proceedings The 3rd International Conference on Business and Management of Technology. ISSN 9768-623-318-029-0

Baskoro, Gembong (2021) Tertiary (Higher) Education in Indonesia under pressure: innovation towards the next normal as a consequence of pandemic Covid 19. Proceeding of The 3rd International Conference on Business and Management of Technology (IConBMT) 2021. ISSN 978-623-318-029-0

Evangelista, Eunike Anastasia and Sofianti, Tanika D. and Baskoro, Gembong (2021) Analytical Hierarchy Process (AHP) for Selection of Project Management Software to Support Remote Working: A Case Study at Logistics Division of a National EPC Company in Indonesia. Masters thesis, Swiss German University.

Hadiyanto, Muhammad and Baskoro, Gembong and Sofyan, Edi (2021) Analysis of Mindset and Behavior in Empahazing Leadership Aspects by Implementation Customer Success Management in Leading Indonesian Heavy Equipment Company. Masters thesis, Swiss German University.

Baskoro, Mohammad Yoga and Sudarto, Sumarsono and Baskoro, Gembong (2021) Availability Improvement by Implementing Customize Maintenance Strategy in Rental Operation of Indonesian Forklift Distributor Company. Masters thesis, Swiss German University.

Nugroho, Yanuar Anggit Eko and Baskoro, Gembong and Hendriana, Dena (2021) Business Model For Startup Company PT Jet Koe Indonesia (Case: JetQ Application Development). Masters thesis, Swiss German University.

Priyanto, Hanif and Baskoro, Gembong and Sofyan, Edi (2021) Effective Performance Management Design on Remote Workforce Environment Using Integrated Seven Tools of Quality Control Analysis for Top Talent Employee Human Asset Value (HAV) Quadrant 1-4 In United Tractors. Masters thesis, Swiss German University.

Santoso, Warno and Baskoro, Gembong and Sofyan, Edi (2021) The Impact of Lean Organization to Employee Cost in Indonesia Largest Heavy Equipment Distributor Company. Masters thesis, Swiss German University.

Sarwono, Edhie and Baskoro, Gembong and Sudarto, Sumarsono (2021) The Impact of Work from Home During Covid-19 Pandemic to Human Capital Organizational Effectiveness in Indonesia Leading Heavy Equipment Company. Masters thesis, Swiss German University.

Syahputra, Herryan and Hendriana, Dena and Baskoro, Gembong (2021) Improvement in Reusable Part Quality to Prolong Remanufactured Product Lifetime for Leading Heavy Equipment Remanufacturing Company in Indonesia. Masters thesis, Swiss German University.

Mulyawanto, Budi and Hendriana, Dena and Baskoro, Gembong (2021) Improving Innovation Management Implementation as Part of The Consistent Application of the Strategic for Business Growth. Masters thesis, Swiss German University.

Hartono, Hartono and Baskoro, Gembong and Sumarsono, Sumarsono (2021) Improving Quality on Tire Curing Process by Using Six Sigma and Failure Mode and Effects Analysis (FMEA) Method in Indonesia Leading Tire Manufacturer. Masters thesis, Swiss German University.

Hapsari, Daniela Dea and Sumarsono, Sumarsono and Baskoro, Gembong (2021) Improving Waste Management System of Leading Construction Firm in Indonesia: A Study in Notable High-Rise Building Project in Jakarta. Masters thesis, Swiss German University.

Wibowo, Anang Wahyu and Baskoro, Gembong and Sudarto, Sumarsono (2021) Improving the Prediction and Accuracy of Parts Marketing Promotion Program for Heavy Equipment Spare Parts Business Through Digitalization Approach. Masters thesis, Swiss German University.

Helmi, Moch. Fatchul and Sumarsono, Sumarsono and Baskoro, Gembong (2021) Improving the Silica Stock Level on Controlling Raw Material Inventories Using the Periodic Review Power Approximation Method in Indonesian Leading Tire Manufacturer. Masters thesis, Swiss German University.

Prasetyo, Satriyo Widy and Baskoro, Gembong and Hendriana, Dena (2021) Integrating Audit System of AGC, ISO 14001, ISO 45001 to Improve Implementation of the Management Systems in Leading Heavy Equipment Companies. Masters thesis, Swiss German University.

Prasetyo, Bagus and Baskoro, Gembong and Nasution, Henry (2021) Reducing Downtime of Extruder Machine Using PDCA And FMEA Methods in Indonesia Leading Tire Manufacturing. Masters thesis, Swiss German University.

Hasanuddin, Hasanuddin and Baskoro, Gembong and Pratama, Aditya T. (2021) Reducing Scrap of Cement A3cm-05 by Using PDCA (Plan Do Check Action) and QCC (Quality Control Circle) Method in an Indonesia Leading Tire. Masters thesis, Swiss German University.

Rizki, Ananda Tri and Baskoro, Gembong and Mariza, Ita (2021) Supply and Demand Analysis by Comparison of Forecasting Method in Manufacturing Motorcycles Tires. Masters thesis, Swiss German University.

Baskoro, Gembong (2020) PENDIDIKAN VOKASI UNTUK MASA DEPAN BANGSA Cerita sukses program Sarjana-Magister SGU - ATMI Cikarang. Project Report. Swiss German University, Tangerang.

Hakim, Jeremia and Berchmans, Hanny J. and Baskoro, Gembong (2020) Design and Development of Low Cost Data Acquisition System for Solar PV Power Plant Monitoring. Masters thesis, Swiss German University.

Orlandi, Rando and Baskoro, Gembong (2018) Analisis Variasi Sudut Relief Pada Alat Potong ISO 6 Terhadap Kekasaran Permukaan Dan Tingkat Keausan. Prosiding Seminar Ilmiah Teknologi ATMI Cikarang 2018. ISSN 2622-11011

Kurniawan, Hery Agung and Taryana, Tatang and Baskoro, Gembong (2018) Arus Listrik Motor Spindle Mesin Milling Sebagai Parameter Presisi Tingkat Kekasaran Permukaan Benda Kerja. Prosiding Seminar Ilmiah Teknologi ATMI Cikarang 2018. ISSN 2622-11011

Amidya, Agatha and Baskoro, Gembong (2018) Pengaruh Bentuk Alat Potong Bujur Sangkar dan Oktagonal Terhadap Ketahanan dan Kekasaran Permukaan Pada Proses Milling. Seminar Ilmiah Teknologi ATMI Cikarang (SinTAC) 2018. ISSN 2622-11011

Setiyawan, Bambang and Baskoro, Gembong (2018) Rekayasa Kekerasan Material Mild Steel Dalam Proses Difusi Karbon. Prosiding Seminar Ilmiah Teknologi ATMI Cikarang. ISSN 2622-11011

Orlandi, Rando and Baskoro, Gembong and Sofyan, Edi (2018) Analysis Of Effect Variation Relief Angle On The ISO 6 Cutting Tool To The Surface Roughness And Wear Level. Masters thesis, Swiss German University.

Susanto, Gabriel Hendri and Syahriar, Ary and Baskoro, Gembong (2018) Analysis of Stress and Deflection of Runway Beam Components in Frame Hoist with 3D Solidworks Software. Masters thesis, Swiss German University.

Pribadi, Martin Thomas Sadmoko Adi and Syahriar, Ary and Baskoro, Gembong (2018) The Effect Of The Workpiece’s Shape And Type Of Material Against The Size Distorsion In Hardening Process. Masters thesis, Swiss German University.

Kurniawan, Hery Agung and Baskoro, Gembong and Sofyan, Edi (2018) Motor Current to Predict Surface Smootheness Quality on the Taper Hole of Anchor Block. Masters thesis, Swiss German University.

Setiyawan, Bambang and Syahriar, Ary and Baskoro, Gembong (2018) Pack Carburizing : an Experimental Study of Mild Steel Carbon Diffusion on Surface Heat Treatments. Masters thesis, Swiss German University.

Putra, Agatha Amidya and Syahriar, Ary and Baskoro, Gembong (2018) Shape Influence of The Cutting Tools in Milling Process On Its Endurance and Surface Roughness in Dry Cutting. Masters thesis, Swiss German University.

Pribadi, Martin Thomas Sadmoko Adi and Sofyan, Edi and Baskoro, Gembong (2017) Automatic Bike Parking System with RFID RC522. Bachelor thesis, Swiss German University.

Nugroho, Ardi and Loebis, Dedy and Baskoro, Gembong (2017) Counter Time Device Based on Arduino to Get Machine Productivity Value. Bachelor thesis, Swiss German University.

Susanto, Hendro and Loebis, Dedy and Baskoro, Gembong (2017) The Design and Construction of an Arduino Based CO2 Controller. Bachelor thesis, Swiss German University.

Khosala, Yudha and Rusyadi, Rusman and Hendriana, Dena and Baskoro, Gembong (2016) Analytical Approach to Improve Performance of Solar Panel System. Masters thesis, Swiss German University.

Pangemanan, Arie Sebastian and Baskoro, Gembong and Hendriana, Dena (2016) Computational Study on The Achievement to Optimizing Design of Vertical Axis Wind Turbine. Masters thesis, Swiss German University.

Kusuma, Arief and Baskoro, Gembong and Soetomo, Moh. A. Amin (2016) Customer Perspektive and Service Quality on Internet Banking Using Servqual Framework. Masters thesis, Swiss German University.

Kurnia, Michael and Rusyadi, Rusman and Baskoro, Gembong (2016) Design and Experiment of a Computer Vision System of an Autonomous Robot. Masters thesis, Swiss German University.

Tan, Kevin and Loebis, Dedy and Baskoro, Gembong (2016) Design and Experimental Obstacle Detection and Avoidance System. Masters thesis, Swiss German University.

Bernadi, Marcel Christian and Baskoro, Gembong and Siahaan, Antonius TP. (2016) The Effectiveness of Business Process Reengineering in Organizational Performance: A Study Case on Construction Division at PT. XYZ. Masters thesis, Swiss German University.

Kuswandiyanto, Haryo Mukarnadi and Baskoro, Gembong and Simatupang, Parhimpunan (2016) Ergonomic: Case Study Welding Operation Management in PT. X. Masters thesis, Swiss German University.

Hermawan, Hendra and Berchmans, Hanny J. and Baskoro, Gembong (2016) Experimental Vision Guided ARM Robot Using Raspberry PI for General Working Application. Masters thesis, Swiss German University.

Yudhiyantoro, Prihangkasa and Loebis, Dedy and Baskoro, Gembong (2016) Implementation Fuzzy Logic Control Technique in Power Supply Using Solar Charging System. Masters thesis, Swiss German University.

Silitonga, Yudha Fernando and Baskoro, Gembong and Galinium, Maulahikmah (2016) MATLAB –Web Crowling & Text Mining Implementation: MATLAB As a Web Crowling and Text Mining Tools for Horizontal Social Conflict-Warning Intelligence System. Masters thesis, Swiss German University.

Kurniawan, Guruh Firman and Soetomo, Moh. A. Amin and Baskoro, Gembong (2016) A Proposed Framework for IT Services Company in Performing Feasibility Analysis of Project's Opportunity. Masters thesis, Swiss German University.

Manongga, William Eric and Baskoro, Gembong and Sitepu, Badikenita (2016) Scrum Methodology Implementation: A Case Study of PT XYZ. Masters thesis, Swiss German University.

Fauzi, Ali and Baskoro, Gembong and Soetomo, Moh. A. Amin (2016) Service Quality Definition and ICT Governance Orientation of Online Business Licensing Services (OBLS) in Indonesia. Masters thesis, Swiss German University.

Septiawan, Jemmy and Baskoro, Gembong and Hendriana, Dena (2016) Six-Axis Stewart-Platform Design With Servo Motors. Masters thesis, Swiss German University.

Fajar, Sauw Albertus and Loebis, Dedy and Hendriana, Dena and Baskoro, Gembong (2016) Temperature Control in Heat Exchanger System Using Fuzzy Logic Controller. Masters thesis, Swiss German University.

Baskoro, Gembong (2015) The concept of balancing Higher Education Institution (HEI) organization towards global and regional challenges. PROCEEDINGS The 3rd International Conference on Industrial Engineering and Service Science (IESS 2015). ISSN 2338-7939

Baskoro, Gembong (2015) Revitalization of Governance and Leadership of (Private) Higher Education Institution (HEI) Towards AEC. Seminar Nasional Manajemen Teknologi XXII 2015 (MMT-ITS Surabaya). ISSN ISBN 978-602-70604-1-8

Wirat, Putu Panji and Baskoro, Gembong (2015) Design and Analyze Monitoring System for Heat Pump. Bachelor thesis, Swiss German University.

Boestami S., Roby and Baskoro, Gembong and Astuti, Murti (2012) Pengaturan Transportasi dan Distribusi Barang dengan Metode Transportasi dan Saving Matrix. BISTEK Jurnal Bisnis dan Teknologi, 20 (1). ISSN 0854-4395

Baskoro, Gembong (2012) Speeding up Modernization and Internationalization (M&I) of Higher Education Institution Through (Open) Innovation. PROCEEDINGS International Conference on Sustainable Innovation (ICoSI) 2012. ISSN ISBN 978-602-7577-02-2

Baskoro, Gembong (2011) MODERNISASI PERGURUAN TINGGI GUNA PEMANTAPAN JATI DIRI BANGSA DALAM RANGKA PEMBANGUNAN NASIONAL. Lemhannas RI, Jakarta.

Baskoro, Gembong (2011) AKTUALISASI BUDAYA HUKUM GUNA MEMANTAPKAN DEMOKRATISASI DALAM RANGKA KETAHANAN NASIONAL. Documentation. Lemhannas RI, Jakarta.

Baskoro, Gembong (2011) HUBUNGAN BILATERAL NEGARA BELANDA DENGAN REPUBLIK INDONESIA. Documentation. Lemhannas RI, Jakarta.

Riawati, Lely and Baskoro, Gembong and Indrayadi, Bambang (2011) Pendekatan Lean Thinking Untuk Mereduksi Waste Dengan DMAIC Dan AHP. PROSIDING “Seminar Nasional Teknik Industri dan Kongres Badan Kerja Sama Penyelenggara Pendidikan Tinggi Teknik Industri Indonesia (BKSTI) VI”. ISSN 978-602-99977-0-5

Baskoro, Gembong (2011) Keindahan Alam Laut Indonesia dalam Teropong Penelitian. Project Report. UWIKA Press, Surabaya.

Romeli, Romeli and Gunawan, Janti and Baskoro, Gembong (2011) Perancangan Pengukuran Kinerja Program Perbaikan Berkelanjutan (Kaizen-Teian) dengan Pendekatan Balanced Scorecard (Studi Kasus di PT. Smelting Gresik). Prosiding Seminar Nasional Manajemen Teknologi XIV-2011, MMT-ITS. ISSN 978-602-97491-3-7

Baskoro, Gembong (2010) Establishing University Partnership in International "Bio-Based" (Action research): Where to go? Seminar Nasional Biologi VIII 2010, FMIPA-ITS.

Baskoro, Gembong (2010) Establishing Bio Preneurship: A new Challenge. Pan-Pacific Conference XXVII, Managing and Competing in The New World Economic Order. ISSN 1-931649-26-X

Sasongko, M. Zuhdi and Baskoro, Gembong and Ghozali, Khakim (2010) Dokumentasi dan Identifikasi Value Perencanaan Sistem Informasi Akuntansi pada Organisasi Badan Layanan Umum (BLU) Perguruan Tinggi Negeri (Studi Kasus: Universitas Negeri Semarang). Prosiding Seminar Nasional Manajemen Teknologi XIII-2011, MMT ITS. ISSN 978-602-97491-2-0

Baskoro, Gembong (2009) Managing Soft Innovation Process under Uncertainty. In: The 11th International Conference on QiR (Quality in Research), August 3-6, 2009, Universitas Indonesia, Jakarta.

Baskoro, Gembong (2009) Lean Innovation: a strategy to survive. Proceedings of the Indonesian Conference on Innovation, Entrepreneurship, and Small Business (ICIES 2009). ISSN 978-979-19081-1-5

Baskoro, Gembong (1994) (FINITE ELEMENT) ANALYSIS OF TORSIONAL SHEAR STRESS, TEMPERATURE PROFILE ALONG THE RADIAL DIRECTION, RADIAL AND LONGITUDINAL DEFLECTION ON ROTARY CEMENT KILN'S SHELL USING ANSYS VALIDATED WITH FORTRAN. Masters thesis, The University of Tulsa, Oklahoma.