Thesis

Aditya, Evan and Abadi, Suryo and Hendriana, Dena (2017) Digital Image Creation of Contour Mapping Data with Ultrasonic Sensor. Bachelor thesis, Swiss German University.

Andrew, Ricky and Sinaga, Maralo and Guritno, Wahyu (2012) Developing and Constructing an Air Drum Kit for Entertainment Purposes. Bachelor thesis, Swiss German University.

Ardi, Raka Sukmana and Ughi, Fuad and Pandjaitan, Maruli (2014) Development and Design of a Device for Calories and Footsteps Calculation. Doctoral thesis, Swiss German University.

Astrianto, Heribertus Guntur and Berchmans, Hanny J. and Iskandar, Aulia Arif (2018) Monitoring Level of Gasoline Tank in Gasoline Pump Station Using Arduino by Displaying on LCD and Using IP Address on The Website. Masters thesis, Swiss German University.

Auliakani, Ramos and Djajadi, Arko and Rusli, Leonard P. (2016) Integrating Nodemcu with Cirrus Logic CS5490 Evaluation Board in Power Quality Measurement. Bachelor thesis, Swiss German University.

Christabel, Patricia and Sinaga, Erikson F. and Umniyati, Yunita (2015) Development of Wireless Controller For A Mobile Robot That Balances On A Ball. Bachelor thesis, Swiss German University.

Christabel, Patricia and Soonggalon, Erikson Ferry and Umniyati, Yunita (2015) Development of Wireless Controller for a Mobile Robot that Balances on A Ball. Bachelor thesis, Swiss German University.

Derry, Derry and Ughi, Fuad and Rachmat, Hendi Handian (2016) Study On Inertial Measurement Unit Sensor For Knee Angle Measurement. Bachelor thesis, Swiss German University.

Dewanto, Gregorius Alvin and Ughi, Fuad and Abdillah, Achmad (2016) Development Of Low Cost Blood Pressure Simulator For Automatic Non-Invasive Blood Pressure Monitor. Bachelor thesis, Swiss German University.

Dirgantara, Dipo and Sinaga, Erikson F. and Rusyadi, Rusman (2015) Designing, Constructing, and Implementing Mouse Pointer Control Using Pupil Tracker for Virtual Keyboard and Monitoring Camera. Bachelor thesis, Swiss German University.

Eridheni, Stenli Octavian and Nasution, Henry and Berchmans, Hanny J. (2021) Implementation of Microcontroller in Lubricant Viscosity Measurement Tool. Masters thesis, Swiss German University.

Firmansyah, Muhammad Fajar and Prajogo, Tutuko and Pratama, Aditya T. (2014) Designing and Developing an External Hardware Controller to be Integrated Into FMS Simulator Modbus Network to Control Simulated Festo MPS Testing Station Developed in Tecnomatix Plant Simulation. Bachelor thesis, Swiss German University.

Fulbert, Alvin and Rusli, Leonard P. (2021) Design and Implementation of Smart Laundry Facility: Locker, Payment, Detergent, Machine Integration. Bachelor thesis, Swiss German University.

Garry, Garry and Rusli, Leonard P. and Kristian, Nova (2021) Small Scale Automated Coil Winding Machine. Bachelor thesis, Swiss German University.

Gondokusumo, Michael M and Djajadi, Arko and Ughi, Fuad (2015) Electromyography Microcontroller Leg Brace Processing Software. Bachelor thesis, Swiss German University.

Hartono, Bibit and Sofyan, Edi and Setiawan, Widi (2018) Analysis Effective Utilization of Microcontroller Port for Enhancing Optimization Hardware. Masters thesis, Swiss German University.

Herman, Stephen Sanjaya and Ughi, Fuad and Supriyanto, Herry (2015) Designing a Linear Control System for the Heating Element of a Baby Incubator. Bachelor thesis, Swiss German University.

Husein, Steven and Sinaga, Maralo (2010) Design and Construction of Face Detection Mobile Robot. Bachelor thesis, Swiss German University.

Isnaini, Erminda and Boeiardjo, Kirina and Guritno, Wahyu (2015) Mathematical Modeling, Simulating and Analyzing a Tower Crane. Bachelor thesis, Swiss German University.

Kevin, Ignasius and Sinaga, Erikson F. and Hanafi, Cepi Mohammad (2016) Designing and Developing Solar Photovoltaic Cleaning Robot to Maintain Generated Power Performance. Bachelor thesis, Swiss German University.

Kevin, Nicolaus and Sinaga, Maralo and Tanaya, Prianggada Indra (2014) Development and Implementation of Distribute Control System for Hexapod Robot. Bachelor thesis, Swiss German University.

Kholim, Thomas Setiawan and Rusli, Leonard P. and Ibar, Ibar (2020) Smart Coin Exchange System for Laundry Business. Bachelor thesis, Swiss German University.

Kusnadi, Alvin and Umniyati, Yunita and Budiarto, Eka (2020) Heat Transfer Apparatus. Bachelor thesis, Swiss German University.

Logis, Charles and Djajadi, Arko and Rusyadi, Rusman (2016) Retrofitting Flexible Manufacturing System FMS-104: Conveyor Substation with ARM Cortex Microcontroller. Bachelor thesis, Swiss German University.

Lucardi, Stevie Andrea and Prajogo, Tutuko and Sinaga, Erikson F. (2014) Designing and Developing an Integrated System to Control a Simulated KUKA Robot in Jack Software. Bachelor thesis, Swiss German University.

Madilao, Muhammad Ali Dato and Djajadi, Arko and Umniyati, Yunita (2015) Designing a Security Control and Database for Smartphone Implemented Using ARM Mini PC. Bachelor thesis, Swiss German University.

Muliacita, Dhuhaa Auga and Prajogo, Tutuko and Sinaga, Maralo (2014) Designing and Constructing a Control System for Existing Distribution Station of Festo MPS Using Siemens Tecnomatix Plant Simulation. Bachelor thesis, Swiss German University.

Murdargo, Senoaji Puspo and Rusyadi, Rusman and Manurung, Edward Boris (2016) Implementing and Developing Stabilizing Control System for Quadrupedal Locomotion Based Robot. Bachelor thesis, Swiss German University.

Narendraputra, Adimas and Budiarto, Eka and Kidarsa, Lydia (2018) Close Loop - Controlled Lightweight Hips Exoskeleton. Bachelor thesis, Swiss German University.

Oestanto, Enzo and Rusyadi, Rusman (2015) Controlling Mobile Robot Using Brainwave. Bachelor thesis, Swiss German University.

Petra, Evan and Prajogo, Tutuko and Sinaga, Maralo (2014) Designing and Creating a Simulated Controller System for Handling Station of Festo Modular Production System and Robot using Tecnomatix Plant Simulation. Bachelor thesis, Swiss German University.

Qiu, Reinaldo and Budiarto, Eka and Rusli, Leonard P. (2018) Design And Construction Of Bicycle Motion Simulator: Mechanical And Structural Analysis For Climb And Descent Simulation. Bachelor thesis, Swiss German University.

Rochmat, Bayu Budiman and Arko, Arko and Sinaga, Erikson F. (2016) Smart Manufacturing Based On Embedded System for The Festo Modular Production System Stations. Bachelor thesis, Swiss German University.

Rochmat, Bayu Budiman and Djajadi, Arko and Sinaga, Erikson F. (2016) Smart Manufacturing Based on Embedded System for the Festo Modular Production System Stations. Bachelor thesis, Swiss German University.

Sabaruddin, Vincens Louis and Thiemann, Peter and Sinaga, Erikson F. (2016) Digital Control of Brushless DC Motor Using TI Piccolo Microcontroller. Bachelor thesis, Swiss German University.

Sandi, Aditya and Sinaga, Erikson F. (2021) Design and Implementation of Temperature Control and Dimmer Controlled Speed for Extruder Machine to Recycle Shredded 3D Printed Products Made of Poly (Lactic Acid). Bachelor thesis, Swiss German University.

Sebastian, Cevel and Rusli, Leonard P. (2021) Sorting Machine Based 0n Weight by Using Load Cell. Bachelor thesis, Swiss German University.

Selo, Alfred Masadhi and Prajogo, Tutuko and Tanaya, Prianggada Indra (2008) Designing of Human Machine Interface (HMI) and Integration into FESTO Modular Production System (MPS). Bachelor thesis, Swiss German University.

Soraya, Herlin and Setiawan, Widi and Hendriana, Dena (2020) Implementation of pH Controller in Tissue Machine Production. Masters thesis, Swiss German University.

Subagio, Rio and Djajadi, Arko (2014) Developing Electrical Energy Monitoring System. Bachelor thesis, Swiss German University.

Suharsono, Richard Adhinata and Manurung, Edward Boris and Rusli, Leonard P. (2020) Ball and Plate System with PID Control. Bachelor thesis, Swiss German University.

Surya, Ivan and Ortjohann, Egon and Rusyadi, Rusman (2016) Development of a Real-Time Scheduler System With API for Linux Based Smart Grid Controller. Bachelor thesis, Swiss German University.

Suwisar, Sebastian and Boediardjo, Kirina and Budiarto, Eka (2015) Modeling, Simulating, and Analyzing Aircraft Flight Dynamics Using MATLAB and Simulink. Bachelor thesis, Swiss German University.

Tantra, Kevin and Djajadi, Arko and Sinaga, Erikson F. (2016) Improvement in Controlling the Festo Modular Production System Stations Based on Embedded System. Bachelor thesis, Swiss German University.

Tjahyadi, Dennis Adrian and Budiarto, Eka and Rusli, Leonard P. (2016) Designing and Constructing a Car Simulator: Mechanical and Structure Analysis. Bachelor thesis, Swiss German University.

Tjandra, Vincent and Sinaga, Erikson F. and Tanaya, Prianggada Indra (2015) Developing Small Scale Transformer Robot. Bachelor thesis, Swiss German University.

Tjandradjaya, Robert and Sinaga, Erikson F. and Rusyadi, Rusman (2016) Implementation of Barcode Scanning System on Bottle Sorting Machine. Bachelor thesis, Swiss German University.

Wijaya, Kevin Indra and Umniyati, Yunita and Sinaga, Erikson F. (2021) Electric Energy Storage System (EESS) Using Saltwater Electrolytes. Bachelor thesis, Swiss German University.

Yolanda, Dave Oktavianus and Rusli, Leonard P. and Budiarto, Eka (2021) Bionic Hand Integration with EMG Sensors. Bachelor thesis, Swiss German University.

Yoserizal, Fernando and Djajadi, Arko and Muhida, Riza (2016) Designing and Constructing Pure Sine Wave Inverter with Wireless Monitoring. Bachelor thesis, Swiss German University.

Yulisman, Adhi Buana Putra and Prajogo, Tutuko (2015) Developing a Simulated Controller System for Mitsubishi Industrial Micro-Robot (RV-M1) Using Tecnomatix's Jack Simulator Via Wifi. Bachelor thesis, Swiss German University.